BG Motor has been a DC motor manufacturer and AC motor supplier for 30+ years.

support@china-bgmotor.com / info@China-bgmotor.com

BG80ZYT163 150W 40V brushed dc motor

Power range:

80-150W

Voltage range:

12-48VDC

Speed range:

1500-4000rpm

Torque range:

0.25-0.48N.m

Life:

2000h

Inquiry

Write a Review

Information

Description

Environmental Conditons	—20℃~50℃	Work Condition	S1.S2.S3
Rotation Direction	CW/CCW	Insulation Class	B-H
Noise	≤65dB	Protection Class	IP40
Gear material	Metal	Number Of Poles	/
Bearing Type	High Quality Ball Bearing	Phase number	/

Advantages

Simple structure:

The structure of DC brush motor is relatively simple, easy to manufacture and maintain. This makes it less costly, suitable for mass production and use.

Easy control:

The speed and torque of the DC brush motor can be easily controlled by adjusting the voltage and current. This makes it very popular in applications that require precise speed and position control.

Large starting torque:

DC brush motor has high starting torque at low speed, which is suitable for applications that require high starting torque, such as electric vehicles, lifting equipment, etc.

Fast response speed:

Due to the small inertia of the motor, the DC brush motor has a very fast response speed and can quickly change the speed and direction.

Wide application:

Due to its simple structure, low cost and easy control, DC brush motors are widely used in various industrial and consumer electronic equipment, such as toys, power tools, small home appliances, etc.

Easy maintenance:

The maintenance and replacement parts (such as brushes) of DC brush motors are relatively simple, reducing downtime and repair costs.

Motor Technical Data

Model	Voltage	No-load		Rated Load				Stall
	Voltage	Speed	Current	Power	Speed	Torque	Current	Torque	Current
	V	rpm	A	W	rpm	Nm	A	Nm	A
BG 80ZYT163	24	2600	0.75	80	2000	0.38	5.1	1.14	15.3

* This Data Is Only Representative Data, Specific Products Can Be Customized

Mechanical Dimensions

Customizable solutions

● Can provide custom voltage, electrical performance, circuit, etc.

● And shaft, installation flange, lead wire, high-temperature class, drive, etc.

● If you have any other needs, please contact our sales engineers

Parts

Applications

Details

In order to ensure that we recommend and provide you with the right brushless DC motor solution, the following key details need to be determined:

Application scenarios:

Understand the specific application environment and use of motors, such as toys, power tools, home appliances, industrial equipment, etc.

Voltage and current:

Determine the range of operating voltage and current required for the motor to ensure that the motor can operate normally under the customer's power system.

Power and efficiency:

Determine the power and efficiency requirements of the motor based on the application needs to ensure that the motor can meet the required operating performance.

Speed and torque:

Clarify the customer's speed and torque requirements for the motor, including the maximum speed, minimum speed, starting torque and working torque, etc.

Size and installation:

Determine the overall size and installation method of the motor to ensure that the motor can adapt to the customer's equipment space and installation location.

Life and reliability:

According to the customer's frequency of use and working environment, determine the life expectancy and reliability requirements of the motor, including the life of brushes and commutators.

Environmental conditions:

Understand the working environmental conditions of the motor, such as temperature range, humidity, dustproof and waterproof level, etc., to choose the appropriate motor type and protection level.

Noise & Vibration:

Choose a low-noise, low-vibration motor model based on your customer's requirements for noise and vibration, especially in applications that require quiet operation.

Control mode:

determine the control mode of the motor, such as whether speed control, position control, start-stop control, etc., and whether it needs to be equipped with a controller or driver.

Cost and budget:

Understand the customer's budget range to choose a cost-effective motor model to meet the customer's cost control requirements

Certifications and standards:

According to the application field and customer needs, determine whether the motor needs to comply with specific certifications and standards, such as CE, UL, RoHS, etc.

By taking all of the above into account, it is possible to more precisely select the most suitable brushless motor model and configuration for a particular application.

Get In Touch With Us

Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!