BG Motor has been a DC motor manufacturer and AC motor supplier for 30+ years.

support@china-bgmotor.com / info@China-bgmotor.com

BG545 High Torque brushed dc motor

Power range:

3-9W

Voltage range:

12-24VDC

Speed range:

2000-6000rpm

Torque range:

0.01-0.02N.m

Life:

800h

Inquiry

Write a Review

Information

Description

20pxEnvironmental Conditons	—20℃~50℃	Work Condition	S1
Rotation Direction	CW/CCW	Insulation Class	B-H
Noise	≤75dB	Protection level	IP40
Bearing Type	High Quality Ball Bearing	Number Of Poles	/
Max. Radial Load	≤50N	Radial Play Of Shaft	≤20N
Axial Play Of Shaft	≤0.03mm	Rated Tolerance Torque	30Kg.cm

Advantages

Simple structure

The structure of DC brush motor is relatively simple, easy to manufacture and maintain. This makes it less costly, suitable for mass production and use.

Easy control

The speed and torque of the DC brush motor can be easily controlled by adjusting the voltage and current. This makes it very popular in applications that require precise speed and position control.

Large starting torque

DC brush motor has high starting torque at low speed, which is suitable for applications that require high starting torque, such as electric vehicles, lifting equipment, etc.

Fast response speed

Due to the small inertia of the motor, the DC brush motor has a very fast response speed and can quickly change the speed and direction.

Wide application

Due to its simple structure, low cost and easy control, DC brush motors are widely used in various industrial and consumer electronic equipment, such as toys, power tools, small home appliances, etc.

Easy maintenance

The maintenance and replacement parts (such as brushes) of DC brush motors are relatively simple, reducing downtime and repair costs.

Overall, single-stage series motors are widely used in many applications that require high performance and flexibility due to their advantages such as high speed, high power density, good start-up performance, and cost-effectiveness.

Motor Technical Data

Model	Voltage	No-load		Rated Load				Stall		Core Thickness
	Voltage	Speed	Current	Power	Speed	Torque	Current	Torque	Current	Core Thickness
	V	rpm	A	W	rpm	N.m	A	N.m	A	N.m
BG-545DC-1244S	12	5000	0.25	9	5300	0.16	1.7	0.48	5.10	57.5
BG-545DC-2431S	24	4000	0.15	6.4	3400	0.18	0.7	0.54	2.10	57.5

* This data is only representative data, specific products can be customized

Mechanical Dimensions

Customizable solutions

● Can provide custom voltage, electrical performance, circuit, etc.

● And shaft, installation flange, lead wire, high-temperature class, drive, etc.

● If you have any other needs, please contact our sales engineers

Parts

Applications

Details

In order to ensure that we recommend and provide you with the right brushless DC motor solution, the following key details need to be determined:

Application scenarios

Understand the specific application environment and use of motors, such as toys, power tools, home appliances, industrial equipment, etc.

Voltage and current

Determine the range of operating voltage and current required for the motor to ensure that the motor can operate normally under the customer's power system.Application scenarios: Understand the specific application environment and use of motors, such as toys, power tools, home appliances, industrial equipment, etc.

Power and efficiency

Determine the power and efficiency requirements of the motor according to the application requirements to ensure that the motor can meet the required working performance.

Speed and torque

Clarify the customer's speed and torque requirements for the motor, including the maximum speed, minimum speed, starting torque and working torque, etc.

Size and installation

Determine the overall size and installation method of the motor to ensure that the motor can adapt to the customer's equipment space and installation location.

Life and reliability

According to the customer's frequency of use and working environment, determine the life expectancy and reliability requirements of the motor, including the life of brushes and commutators.

Environmental conditions

Understand the working environmental conditions of the motor, such as temperature range, humidity, dust and water resistance level, etc., to select the appropriate motor type and protection level.

Noise and vibration

According to the customer's requirements for noise and vibration, choose a motor model with low noise and low vibration, especially in applications that require quiet operation.

Control mode

Determine the control mode of the motor, such as whether speed control, position control, start-stop control, etc., and whether it needs to be equipped with a controller or driver.

Cost and budget

Understand the customer's budget range to choose a cost-effective motor model to meet the customer's cost control requirements.

Certifications and standards

According to the application field and customer needs, determine whether the motor needs to comply with specific certifications and standards, such as CE, UL, RoHS, etc.

By taking all of the above into account, it is possible to more precisely select the most suitable brushless motor model and configuration for a particular application.

Get In Touch With Us

Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!